Products
Black zinc-plated hexagonal drill tail wire
Through the black passivation liquid treatment containing silver salt (c2D), a 10-15μm coating is formed, and the salt spray test is more than 96 hours. Environmentally friendly black zinc plating uses trivalent chromium passivation, does not contain hexavalent chromium, and complies with RoHS standards.
Description
marker
Product Introduction
Process characteristics: Through the black passivation liquid treatment containing silver salt (c2D), a 10-15μm coating is formed, and the salt spray test is more than 96 hours. Environmentally friendly black zinc plating uses trivalent chromium passivation, does not contain hexavalent chromium, and complies with RoHS standards.
Performance advantages: surface hardness HV600-700, wear resistance is better than color zinc, and stability is strong in high temperature environment (temperature resistance ≤200℃). The shear strength of M8 specification in Q345 steel is ≥60kN.
Application scenarios: automotive parts (such as chassis connection), high-end mechanical equipment, solar heat absorption devices and other scenes with high requirements for appearance and corrosion resistance.
Key comparison and selection recommendations
| Type | Surface treatment | Salt spray test | Hardness range | Corrosion resistance | Environmental protection | Typical application scenarios |
| Electro-galvanized hexagonal head | Silvery white | 24-48 hours | HV560-750 | General | No hexavalent chromium | Indoor steel structure, ordinary mechanical connection |
| Colored zinc-plated hexagonal head | Rainbow color | More than 72 hours | HV580-720 3 | Good | Trivalent chromium environmental protection | Outdoor photovoltaic bracket, port equipment |
| Black zinc-plated hexagonal head | Black | More than 96 hours | HV600-700 | Excellent | Trivalent chromium environmental protection | Automobile chassis, high-temperature equipment |
| Electro-galvanized cross countersunk head | Silvery white | 24-48 hours | HV580-720 | General | No hexavalent chromium Indoor decoration, furniture manufacturing | Colored zinc-plated cross countersunk head |
| Rainbow color | More than | 72 hours | HV580-720 | Good | Trivalent chromium environmental protection | Outdoor awnings, bathroom equipment |
Selection suggestions:
Environmental factors: For outdoor or high humidity environments, color zinc plating or black zinc plating is preferred; for indoor dry environments, electroplating zinc can be selected.
Load requirements: For high-load scenarios (such as bridges and heavy machinery), black zinc-plated hexagonal drill tail screws must be selected. Specifications above M8 must be tested for torque according to GB/T 3098.11.
Environmental requirements: Electroplating zinc (chromium-free) is recommended for the medical and food industries; trivalent chromium passivated color zinc plating or black zinc plating can be selected for ordinary industrial projects.
Installation specifications:
Electric drill speed control: 3.5mm diameter drill tail screws are recommended to be 1800-2500 rpm, and 5.5mm diameter drill tail screws are recommended to be 1000-1800 rpm.
Torque control: The torque of the M4 specification is about 24-28kg・cm, and the M6 specification is about 61-70kg・cm. Avoid deformation of the substrate due to excessive tightening.
contact us
Related popular products
Electrogalvanized pins
GB/T 882-2008 “Pin” standard, nominal diameter 3-100mm, materials include carbon steel, stainless steel, etc., electrogalvanized layer thickness 5-12μm, in line with c1B or c1A post-treatment requirements.
T-bolt (T-slot bolt)
T-bolt is a bolt with a T-shaped head, used with a T-slot (standard DIN 3015-2), and the flange design increases the contact area and can withstand lateral shear force. Common specifications are M10-M48, thickness 8-20mm, and surface phosphating treatment for corrosion resistance.
10.9S large hexagon bolts
10.9S large hexagon bolts are the core components of high-strength friction-type connections. They are composed of bolts, nuts, and double washers (standard GB/T 1228). The tensile strength reaches 1000MPa and the yield strength is 900MPa. Its surface treatment adopts Dacromet or multi-alloy co-penetration technology, and the salt spray test exceeds 1000 hours. It is suitable for extreme environments such as oceans and high temperatures.
Electroplated galvanized gaskets
Electroplated galvanized gaskets are gaskets that deposit a zinc layer on the surface of carbon steel or alloy steel through an electrolytic process. The thickness of the zinc layer is usually 5-15μm. Its surface is silvery white or bluish white, and it has both anti-corrosion and decorative functions. It is one of the most commonly used surface treatment methods in the industrial field.
Electroplated zinc flange bolts
The head of the flange bolt has a round flange to increase the contact area and disperse the pressure (standard GB/T 5787, GB/T 5789). Common specifications M6-M30, material Q235 or 35CrMo, surface galvanized or blackened.
Colored zinc-plated expansion hook
Rainbow chromate passivation (c2C) is performed on the basis of electrogalvanizing to form a colored passivation film with a thickness of about 8-15μm. The salt spray test can last for more than 72 hours without white rust.
Electrogalvanized hexagonal bolts
Hexagonal bolts are the most common standard bolts with hexagonal heads and are used with nuts (standard GB/T 5780). Common materials are Q235 or 35CrMo, with galvanized or blackened surfaces.
Hexagon socket black zinc-plated bolts
The hexagon socket bolt head has a hexagon socket hole and needs to be tightened with a hexagon socket wrench (standard GB/T 70.1). Common materials are 35CrMo or 42CrMo, and the surface treatment is divided into three types: electrogalvanized, color zinc-plated, and black zinc-plated.
Electrogalvanized chemical bolts
Chemical bolts fix the screw in a substrate such as concrete through a chemical anchoring agent, and are composed of a screw, a hose, and a washer (standard GB 50367). Common materials are galvanized steel or stainless steel, and the anchoring depth is ≥8d (d is the bolt diameter).
Hot-dip galvanized embedded plate
Same as electrogalvanized embedded plate, using Q235 or Q355 carbon steel, steel plate thickness 8-50mm, anchor bar diameter 10-32mm, in line with GB/T 700 standard.
Hexagon socket hot-dip galvanized bolts
The hexagon socket bolt head has a hexagon socket hole and needs to be tightened with a hexagon socket wrench (standard GB/T 70.1). Common materials are 35CrMo or 42CrMo, and the surface treatment is divided into three types: electrogalvanized, color zinc-plated, and black zinc-plated.
Electrogalvanized embedded plate
Q235 or Q355 carbon steel, the thickness of the steel plate is usually 6-50mm, the diameter of the anchor bar is 8-25mm, in line with GB/T 700 or GB/T 1591 standards.
Hexagon socket colored zinc-plated bolts
The hexagon socket bolt head has a hexagon socket hole and needs to be tightened with a hexagon socket wrench (standard GB/T 70.1). Common materials are 35CrMo or 42CrMo, and the surface treatment is divided into three types: electrogalvanized, color zinc-plated, and black zinc-plated.
Welding nut (welding nut)
Welding nut is a nut fixed to the workpiece by welding. Common types include projection welding nut (DIN929) and spot welding nut (DIN2527). Its structure includes threaded section and welding base. The welding base has a boss or plane to enhance the welding strength.
Electrogalvanized nuts
Electrogalvanized nuts are the most common standard nuts. A zinc layer is deposited on the surface of carbon steel through an electrolytic process. The surface is silvery white or bluish white, and has both anti-corrosion and decorative functions. Its structure includes a hexagonal head, a threaded section, and a galvanized layer, which complies with GB/T 6170 and other standards.
Please leave us a message
-
-
-
WeChat
