Products
Electrogalvanized pins
GB/T 882-2008 “Pin” standard, nominal diameter 3-100mm, materials include carbon steel, stainless steel, etc., electrogalvanized layer thickness 5-12μm, in line with c1B or c1A post-treatment requirements.
Description
marker
Product Introduction
Standard: GB/T 882-2008 "Pin" standard, nominal diameter 3-100mm, materials include carbon steel, stainless steel, etc., electrogalvanized layer thickness 5-12μm, in line with c1B or c1A post-treatment requirements.
Performance: Smooth surface, good corrosion resistance, suitable for general mechanical connections, such as hinged column feet, cable ends, etc., can withstand axial tension and shear force.
Type: divided into type A (without cotter pin hole) and type B (with cotter pin hole), type B is safer and suitable for scenes that need to prevent falling off.
Surface treatment comparison and selection suggestions
| Treatment process | Color | Thickness range | Salt spray test | Corrosion resistance | Wear resistance | Main application scenarios |
| Electrogalvanizing | Silvery white / blue-white | 5-12μm | 24-48 hours | General | Medium | Indoor dry environment, ordinary mechanical connection |
| Colored zinc plating | Rainbow color | 8-15μm | More than 72 hours | Good | Medium | Outdoor, humid or mildly corrosive environment |
| Black zinc plating | Black | 10-15μm | More than 96 hours | Excellent | Good | High temperature, high humidity or decorative scenes |
Selection suggestions:
Environmental factors: Colored zinc plating or black zinc plating is preferred in humid or industrial environments; electrogalvanizing can be selected in dry indoor environments.
Load requirements: For high-load scenarios, it is necessary to select expansion bolts of appropriate grades (such as 8.8 or above) according to the specification table, and pay attention to the impact of the galvanizing process on mechanical properties (such as hot-dip galvanizing may cause a decrease in tensile strength of about 5-10%).
Environmental requirements: Colored zinc plating and black zinc plating may contain hexavalent chromium and must comply with environmental directives such as RoHS; cold galvanizing (electrogalvanizing) has better environmental performance and does not contain heavy metals.
Appearance requirements: Colored zinc plating or black zinc plating is preferred for decorative scenes, and electrogalvanizing can be selected for general industrial use.
contact us
Related popular products
Electroplated galvanized flange nut (flange face nut)
Electroplated galvanized flange nut is a special nut with a circular flange added to one end of the hexagonal nut. The flange increases the contact area with the connected parts, disperses the pressure and enhances the shear resistance. Its structure includes threaded section, flange and galvanized layer. Some models have anti-slip teeth on the surface of the flange (such as DIN6923 standard).
Colored zinc plated hexagonal bolts
Hexagonal bolts are the most common standard bolts with hexagonal heads and are used with nuts (standard GB/T 5780). Common materials are Q235 or 35CrMo, with galvanized or blackened surfaces.
Electro-galvanized expansion hook
Made of Q235 carbon steel and other materials, the surface is electro-galvanized, and the coating thickness is usually 5-12μm, which meets the post-treatment requirements of c1B (blue-white zinc) or c1A (bright zinc) in GB/T 13911-92 standard.
U-bolts
U-bolts are U-shaped with threads at both ends, and are used to fix cylindrical objects such as pipes and plates (standard JB/ZQ 4321). Common specifications are M6-M64, made of carbon steel or stainless steel, with galvanized or blackened surface.
Anti-loosening nut (locking nut)
Anti-loosening nut is a nut that prevents the nut from loosening through special design.
Electrogalvanized expansion bolts
It consists of countersunk bolts, expansion tubes, flat washers, spring washers and hexagonal nuts. The material is mostly carbon steel (such as Q235), and the thickness of the electrogalvanized layer is 5-12μm, which meets ISO 1461 or GB/T 13912-2002 standards.
Colored zinc-plated cross countersunk drill thread
The thickness of the color zinc passivation film is 8-15μm, the salt spray test is more than 72 hours, and the appearance is rainbow-colored. When trivalent chromium passivation is used, the environmental protection performance is excellent.
Carriage bolt (half-round head square neck bolt)
The head of the carriage bolt is a large semicircle, and the neck is square to prevent rotation (standard GB/T 14). Common materials are Q235 or stainless steel, with galvanized or blackened surface.
Electroplated galvanized gaskets
Electroplated galvanized gaskets are gaskets that deposit a zinc layer on the surface of carbon steel or alloy steel through an electrolytic process. The thickness of the zinc layer is usually 5-15μm. Its surface is silvery white or bluish white, and it has both anti-corrosion and decorative functions. It is one of the most commonly used surface treatment methods in the industrial field.
Colored zinc-plated gaskets
Colored zinc-plated gaskets are passivated on the basis of electrogalvanizing to form a rainbow-colored passivation film (containing trivalent chromium or hexavalent chromium) with a film thickness of about 0.5-1μm. Its anti-corrosion performance is significantly better than ordinary electrogalvanizing, and the surface color is bright, with both functionality and decorativeness.
7-shaped anchors (7-shaped anchor bolts)
The 7-shaped anchor is named because one end of the bolt is bent in a “7” shape. It is one of the most basic types of anchor bolts. Its structure includes a threaded rod body and an L-shaped hook. The hook part is buried in the concrete foundation and connected to the equipment or steel structure through a nut to achieve a stable fixation.
Colored zinc-plated expansion bolts
The color zinc passivation process (c2C) is adopted, the coating thickness is 8-15μm, and the corrosion resistance of the salt spray test is more than 72 hours, which has both anti-corrosion and decorative functions.
Colored zinc flange bolts
The head of the flange bolt has a round flange to increase the contact area and disperse the pressure (standard GB/T 5787, GB/T 5789). Common specifications M6-M30, material Q235 or 35CrMo, surface galvanized or blackened.
Electroplated zinc flange bolts
The head of the flange bolt has a round flange to increase the contact area and disperse the pressure (standard GB/T 5787, GB/T 5789). Common specifications M6-M30, material Q235 or 35CrMo, surface galvanized or blackened.
Stud bolts
Stud bolts have threads at both ends and a bare rod in the middle, which is used to connect thick plates or penetrate installation (standard GB/T 901). Common materials are 45# steel or 40Cr, with galvanized or blackened surface.
Please leave us a message
-
-
-
WeChat
