Rainbow chromate passivation (c2C) is performed on the basis of electrogalvanizing to form a colored passivation film with a thickness of about 8-15μm. The salt spray test can last for more than 72 hours without white rust.

Made of Q235 carbon steel and other materials, the surface is electro-galvanized, and the coating thickness is usually 5-12μm, which meets the post-treatment requirements of c1B (blue-white zinc) or c1A (bright zinc) in GB/T 13911-92 standard.

Stud bolts have threads at both ends and a bare rod in the middle, which is used to connect thick plates or penetrate installation (standard GB/T 901). Common materials are 45# steel or 40Cr, with galvanized or blackened surface.

The hexagon socket bolt head has a hexagon socket hole and needs to be tightened with a hexagon socket wrench (standard GB/T 70.1). Common materials are 35CrMo or 42CrMo, and the surface treatment is divided into three types: electrogalvanized, color zinc-plated, and black zinc-plated.

The hexagon socket bolt head has a hexagon socket hole and needs to be tightened with a hexagon socket wrench (standard GB/T 70.1). Common materials are 35CrMo or 42CrMo, and the surface treatment is divided into three types: electrogalvanized, color zinc-plated, and black zinc-plated.

The hexagon socket bolt head has a hexagon socket hole and needs to be tightened with a hexagon socket wrench (standard GB/T 70.1). Common materials are 35CrMo or 42CrMo, and the surface treatment is divided into three types: electrogalvanized, color zinc-plated, and black zinc-plated.

The hexagon socket bolt head has a hexagon socket hole and needs to be tightened with a hexagon socket wrench (standard GB/T 70.1). Common materials are 35CrMo or 42CrMo, and the surface treatment is divided into three types: electrogalvanized, color zinc-plated, and black zinc-plated.

The head of the carriage bolt is a large semicircle, and the neck is square to prevent rotation (standard GB/T 14). Common materials are Q235 or stainless steel, with galvanized or blackened surface.

Hexagonal bolts are the most common standard bolts with hexagonal heads and are used with nuts (standard GB/T 5780). Common materials are Q235 or 35CrMo, with galvanized or blackened surfaces.

Hexagonal bolts are the most common standard bolts with hexagonal heads and are used with nuts (standard GB/T 5780). Common materials are Q235 or 35CrMo, with galvanized or blackened surfaces.

Hexagonal bolts are the most common standard bolts with hexagonal heads and are used with nuts (standard GB/T 5780). Common materials are Q235 or 35CrMo, with galvanized or blackened surfaces.

Hexagonal bolts are the most common standard bolts with hexagonal heads and are used with nuts (standard GB/T 5780). Common materials are Q235 or 35CrMo, with galvanized or blackened surfaces.